What sparked this to be a venture? Do you know anyone who’s used one before? It is very interesting and would love to watch your progress.
1 Like
Drove by a place down the road from me a couple of years ago and this was for sale. I like the idea but he wanted too much for it. Have watched for a bit as they kept having yard sales and stopped the other day and made an offer of about a 1/4 of what he wanted two years ago and he said ok. We started chatting about it and he said he grew in Canada for years and used clones. He said it was basically set up and go. He had another light for the mother plant and he would take cuttings and start them in the pots. When the roots of the plants are hanging down with the wicking it was time to change the timers on the lights and start the bloom. It will be after the holidays before I get anything going and then it will be a bit before I can get a mother ready to start the clones. I will be sure to post more down the road
2 Likes
Working on lighting and I think this will work out. This is the glass tube that housed the original metal halide lights looks like it will handle about 16 led light bars. My thought was to have different spectrum bulbs and control the color by which lights are on and how long they run. The plants go around the light bar so they are always pointed at it. Here are 4 bulbs sitting in the tube. I will have to design and print a bracket to hold them
2 Likes
Made some progress, got a spacer designed and printed and it works great and will hold 16 4’ lights. Of course the other bulbs I am using are taller so I had to redesign the spacer and not 100% sure it will work. I have no idea what I am doing with this but it looks cool anyway
4 Likes
OK, got the brackets redesigned and printed. I have the lights split into two groups so I can have either color or both going. Still waiting for a few UV lamps to come in and will have to figure out which bulbs they should replace when I see them
3 Likes
What are you planning to use to control the whole system?
Looks really cool!
1 Like
Thanks
Not 100% sure but was thinking smart plugs and Alexa
1 Like
wheres the updates? i had a friend with one of these in '04-'05 . i think he grew a sativa dom strain that had to be pulled a cpl wks early bcuz of size and i never heard anything else about it after that. ive always wondered what you could do with a nice indica strain that stays real short and compact.
2 Likes
Just got it set up and I am gong to test it out with less valuable seed like some lettuce, basil etc… I will add some pictures to the post later this am as I have it set up in a 5 x 5 grow tent. Lights are one and fan is mocked up but still need to work on the water set up
2 Likes
Well that took a little longer than expected. I have the system set up in a 5x5 grow tent. I got the led’s in the center tube on the brackets I made just fine and I think there should be plenty of light but that glass tube was getting pretty warm so I designed and printed a cap for one end of the tube that holds a small 80mm usb powered fan. It is working well and while the tubes still get warm after a few hours you can hold you hand on them so not too warm. The original set up had two 900 watt sodium lights so it got very hot and there was a far more powerful fan to keep it cooler but I am sure this set up will be much cooler than that. Going to plant some various herbs just to see how it works on a test run. I have to set up the water system as well but that is pretty simple as there is a float valve that keeps the lower try filled. The pots will have rock wool in them and a gauze tube that will hang out of the bottom of the pots and get dipped into the water every 2 or 3 hours. The video (assuming I got it attached) has the unit spinning. Probably hard to tell since I don’t do a great job of holding still
2 Likes
That thing is awesome
2 Likes
When are you loading that mother up? Wowee
3 Likes
How does it water? Do the pots wick when they reach the bottom?
2 Likes
Going to do a test grow with herbs and greens, I figure that will be safe way to test it and make sure it all functions as planned
1 Like
Yes, it dips through a pool of water. I am testing some pots with cotton gauze hanging out as that was how the sample pot that came with it was set up but others that I have just put the rock wool in seem to be doing well without the gauze. I am setting up a 5 gallon jerry can and it feeds into a float valve to keep the water level set.Hard to get a good picture but here is a pot with the bottom in the pool. The tray is extended on the exit side so the pots drip into the tray and the water goes back to the pool
3 Likes
Nice. Yeah rockwool will wick like crazy by itself.
2 Likes