Hey guys here is what I did to create the green house. To build the floor frame I used 7 2x12x14ft Outdoor treated planks. This created the area of the green house as well as the 4 beds inside of it. From there I drilled 10 holes 1 ft down in to the ground and put 18 inch stakes in them, I used 3/4 inch width on the steaks so the 1 inch PVC Pipes would fit over them. From there I used braces to mount the PVC Pipes into the ground. I then created two door frames and purchased screen doors. I dug out two holes in the ground in the center of the green house, this would hold the brace that the doors would be attached to. I mounted the 2s12x16 onto the posts and the door frames. Then covered it all in 6mil plastic and used staples to secure them.
Below you’ll find the key supplies along with product numbers I got off Lowes website, as well as a link to the youtube video I was guided by, which helps really put together what I’m trying to explain.
1-in x 10-ft 200 SDR 21 PVC Pipe
Item #: 23993 Model #: PVC 20010 0600RS
Unit Price $1.86 Subtotal $16.74 QTY
9
1-in x 10-ft 200 SDR 21 PVC Pipe
Item #: 23993 Model #: PVC 20010 0600RS
Unit Price $1.86 Subtotal $1.86 QTY
1
10-Pack 1-in PVC Sch 40 Coupling
Item #: 25534 Model #: PVC 02100C 1000HC
Unit Price $3.78 Subtotal $3.78 QTY
1
Natural Wood Hinged Single Bar Screen Door (Common: 36-in x 80-in; Actual: 36-in x 80-in)
Item #: 442685 Model #: WCRA36
Unit Price $69.00 Subtotal $138.00 QTY
2
(Common: 5/4-in x 6-in x 16-ft; Actual: 1-in x 5.5-in x 16-ft) Standard Treated Deck Board
Item #: 489135 Model #: 54616T225EL
Unit Price $8.98 Subtotal $17.96 QTY
2
(Common: 4-in x 4-in x 8-ft; Actual: 3.5-in x 3.5-in x 8-ft) #2 Treated Lumber
Item #: 639135 Model #: 448T240C
Unit Price $9.27 Subtotal $18.54 QTY
2
1-in Two-hole Strap Rigid Metal Conduit Compatible, Conduit Fitting
Item #: 816293 Model #: 42832
Unit Price $0.78 Subtotal $7.80
Youtube Link
