Grow-Optimized Industrial Dehumidifier
MODEL A300V3
Our most powerful dehumidifier, the Anden Model A300V3 removes 300 pints per day of moisture from the air. Optimized for use in large, professional grow spaces. Redundant product installation is simple and units work seamlessly with smart controls and remote RH sensors for the ultimate in monitoring and control. V3 model is for single phase 277 VAC power configurations.
CIRCULATION
Anden Model A300V3 Dehumidifier is Grow-Optimized and designed to dehumidify the air coming into the unit by passing the incoming air over an evaporator coil to drop the air temperature below the dew point of the air. Moisture is removed from the air and drained out of the unit to a common floor or waste drain. The air is then reheated in the condenser coil and exits the unit.
INCLUDED
MODEL A76
Dedicated monitoring and control of each dehumidifier at canopy height.
INSTALLATION CONFIGURATIONS
The Anden Model A300V3 Dehumidifier is the perfect solution for the precise management of humidity required in an indoor growing environment.
SUSPENDED
- Air is pulled into the dehumidifier directly from the space, dehumidified and returned
to the space. - The dehumidifier is hung from the ceiling to save space in the facility.
FREESTANDING
- Air is pulled into the dehumidifier directly from the space, dehumidified and returned to the space.
INLET AND OUTLET DUCTED
- Ducted to circulate air to equalize humidity, temperature and move CO2
- Dehumidifier located in adjacent room and ducted to space requiring dehumidification.
- Great for drying room applications where space may be limited.
anden-a300v3-dehumidifier-specifiction-sheet-6511.pdf (836.5 KB)
Contact me if you have any questions @nick_anden