HLG Saber LEDs PAR and PPFD

Grow from Home DIY Do It Yourself
1

I’m finding little information on these underdogs and need to review realtime PAR/PPFD results before updating the drivers.

My DIY 100W HLG sabers are using the same driver as the HLG100W V2 DIY quantum boards, OWA-90U-36-P1M for the EZ barrel plug. The plant rack simply expanded based on that convenient connector.

HLG says to use the HLG100W V2 quantum board results.

Anyone with these models, have measured PAR/PPFD values?

24” above
18” above
14” above

We could arrange a visit for some quick readings.

Thank you in advance.

1 Like
2

What exactly are you trying to achieve?

1 Like
3

Had a nice conversation with HLG regarding this lamp, and an unlocked iPhone PAR meter app Photone.

A strip of printer paper diffuses the light so the front camera functions better.

The plants are seeing 350 PPFD at 90W.

Now shopping for higher wattage 600W drivers to increase intensity and reduce room temperature.

The PPFD values are pretty close to the HLG 100W V2 utube review.

HLG-600H-36AB is what is needed now.

1 Like