Hey guys,
Curious if you might have a favorite label or stake printer you use. I am about out of some old ones I have used and would like something easier to use. I also can’t decide between the wrap around tags or stakes…maybe use both depending? I like the idea of using the tags on young plants, but would still like to use stakes for seeds/clones. All feedback would be appreciated!
Some nice looking ones here…
https://hortcatalog.integracolor.com/en/thermal-transfer-printable-tags-pot-stakes
2 Likes
With a hole punch and a zip tie you can do anything you want with those tags, @Bogaat. I like wrapping them loosely around the lowest stem on the plant; then the tag follows the plant everywhere and the plant has room to grow around the zip tie. 
2 Likes
Sato is a good all around option.
1 Like
I did end up getting the tags I mentioned above…
https://hortcatalog.integracolor.com/en/Strip-Tags-Heavy-Duty-Side-To-Side
along with their less expensive printer…
https://hortcatalog.integracolor.com/en/titan-4-thermal-transfer-printer
They work well! I haven’t used the software yet…just made a template in word. I made maybe a thousand so far. Great tags 
1 Like