Hello growmies I’m trying to hook up my vivosun aerozesh fan to my ac infinity controller… i did done research before getting the controller looked like everything would work with the right cords. Now that I’m trying to set it up it won’t pick up in the port amd i reviewed the information i researched i should have looked closer it says the aerozesh is compatible then says something about the lights… it was referencing to the vivosun lights being compatible not the fans the information mixed up the aerolight and aerozesh… does anybody have this issue and resolved it or any advice besides just running it on a second controller like I’m doing for now I’m trying to integrate 1 tent ac infinity and 1 vivosun controlled. Thanks fam
Justin
3 Likes
The AC Infinity controller is not compatible to Vivosun fans, you can use GrowHub E42A or E25 to control the fan.
2 Likes
Thanks the ai on the app is trying to tell me they are compatible i have both of those i was just trying to get it all under a single controller
3 Likes
When I looked at the c type adapter I thought it would work but it won’t show up on the controller. AC Infinity says Vivosun fans won’t work on their controllers.
2 Likes
Yup same thing with mine thanks thought i may have been doing something dumb…
When i first hooked up the lights i had just smoked and was getting so frustrated that i couldn’t get the vivosun lights to work on the ac infinity controller… i didn’t plug the power cord in lmao
3 Likes
I actually forgot i can control the inline fan from the e25 that essentially solves my issue lol
4 Likes
The ac infinity at least in my experience has been wildly even dangerously inaccurate… readings of between 1300 amd 1400 register on the 600s maybe up to 800s maybe it’s a design flaw only being able to take a reading from 1 side i compared to 2 other devices and even after getting to calibrate the ac infinity sensor it will be somewhat accurate between 400 and 600 but after that forget about it will still be readings in the low 700s when actually in the 1000 to 1200s… also there is a very significant delay in the readings which could be why im not able to calibrate it right i noticed between 2 and 5 min even sometimes longer… I’m hoping the spider farmer will be better
2 Likes
Yeah I learned a long time ago fix first, smoke second lol.
Marty
3 Likes