Nice buddy. If u do any training give it atleast 3 to 5 days recovery before u flip it and don’t stress it during flip if u can get ur hands on like bud ignitor that’ll help get good bud sites and many of them. It’s not really needed but helps during flower flips
7 Likes
Appreciate the info brother 
stay lit my friend 
7 Likes
So watered my Alaskan ice clone with ph’d water at 6.97 PH and 170 ppm well water (tap) runoff was ph 6.28 ppm 850
This clone is in fox farms happy frog and have been having low ph issues the last 2 bags I’ve gotten ( from a different source then what I normally use) and keeps dropping my runoff ph drastically so to compensate i go in at a high ph and it seems to help i mean the plant looks happy so that’s why the high ph going in
5 Likes
Watered the two coast of main girls chatty cathy underworld genetix and pluto cut ethoes got 100ml ea. Of 6.97ph 170 ppm water those should be good for around 2 more weeks before i gotta start feeding
6 Likes
Hydro been staying steady @ ph 6.1 and ppm at 990 so im adding ph down to drop ph down to around 5.7-5.5, i know there small yet but the numbers seem too static or not much change
5 Likes
Be happy if your numbers aren’t jumping around doing Hydro. 
You might want to try to bring your pH on your other plants down to around six when you feed them. Feeding them close to a seven will bring your soil pH up to or above seven if you’re not careful. Recovery from a lockout due to PH can take a long time, best to not let it start. Be especially careful during flower because there probably won’t be much of a recovery. They will finish, but a lot of potential will have been lost. 
4 Likes
Is there a way u can test the water temps at say ehen light are about to kick off test the temp of water see what it shows and just as lights are about to kick back on test it and see how much of a temp swing there is. In the hydro add some hydroguard and it may help balance out some of the shit that makes it swing so much. Otherwise id say try like bloom city ph professional up and down it helped a ton hold a ph in my rez for the autopots like superminimal chamge in ph swing like.01 to. 02 at most in ⁵ days. Using gh ph up and dow. Was like a point and a half plus sometimes swing.
4 Likes
I agree , numbers are staying steady just not seeing ppm dropping more of a soil mindset i guess 
more than likely I’m complicating much more than I need too for sure i do appreciate your input brother, stay lit my friend
5 Likes
I’ll hafta check those numbers, ill let ya know
4 Likes
So lights on rez temps at 64°f but haven’t gotten lights out yet as we got a cold front moving thru this week and temps have dropped 40° so in the 20’s this week when they level off I’ll get a better reading @Mark0427
4 Likes
Update on everyone
Fed clone on 3/18.
Numbers going in at ph 6.9. Ppm 1030
Runoff ph 6.1 ppm 1280
Rdwc at ph 5.8 ppm 1000 temps 60°f
Holding steady
Com girls stil ph’d water at ph 6.72
100 ml each, large circle around outer perimeter of pot to get root to search out the water
Root porn:metal:
Keep em growing gromies
6 Likes
Looking geeat.
6 Likes
3/21
Feed day for clone jacks 4/2.2 no epsom also added seaweed extract,uped part b as leaves looking a little lime green thruout so thinking need a little more nitrogen
In at ph 6.69 ppm 1100
Runoff ph 6.1 ppm 1440
3/22
Ph’d water only yet fom com girls cc & pc
In ph 6.45 ppm 150 (well water)
170ml each
3/23
Feed clone ( she’s been thirsty and hungry)
In ph 6.55 ppm 950
Runoff ph 6.18 getting a little better ppm 1440 this one is the only one in ffhf and been having issues with ph dropping drastically in Runoff but now seems much more stable
3/23
Rdwc holding steady at 64°f ph 5.85 ppm 1000 gonna do a water change this afternoon, im seeing a bit of an issue on one of the orange sherberts i see some rust spots, the other one is just fine so apparently the one is picky gonna up part b to 2.2 on theses also and see if it helps
Any input is welcome stay lit gromies
7 Likes
Rez change today
Ph 5.85 ppm 1060
Silica at 2ml/gal
Jacks 4/2.2 no epsom (2.2 due to rust spots)
Southern AG at 1ml per gallon
Roots look good as far as i know raised part b to 2.2 per gallon, rust spots are being persistent on one orange sherbert hopefully this helps . This was day 13 since last rez change
Coast of main girls chatty cathy and pluto cut (an auto) trucking along so far im impressed with com and the rdwc setup
Stay lit my friends
5 Likes
3/25
Water only for the clone (tap water)
Ph 6.54 ppm 120 going in
Runoff ph 6.2 ppm 900
Water com girls same mix
Chatty cathy (photo)and pluto cut (auto)
Ph 6.54 ppm 120. 200ml each
Ph in rdwc spiked overnight to 6.35 so adjusted to 5.8 with 30 ml of ph down put 10ml at a time in and let it cycle thru for 10 to 15 minutes and checked ea. Time did this last rez change and after adjustment it held steady
So we’ll see if i get some results upping part b .2 g hopefully
4 Likes
They lookong good. Have beautiful color to them bruh.
4 Likes
They’re doing very well, I’m definitely impressed with the growth for sure
Just gotta get those rust spots corrected on the one in rdwc i upped part b a smidge so hoping that helps. Keep em growing
3 Likes
Time to give pluto cut and chatty cathy a watering, gave em ph’d water at ph 6.7 ppm 130. Each took about 7/8 of a gallon before getting a slight runoff
Rdwc trucking along nicely as we creep into the start of week 4 which starts on the 7th. Looking like nute adjustment ( part b plus .2) is helping rust spots appear to have cleared up on new growth i do still see a slight possible nitrogen issue but so far appears minor ph is at 6.02 ppm 1100 so numbers holding good with water temp at 64°f. These rdwc plants are starting to really take off now these are the orange sherbert, now i can’t wait for them to start flowering, being auto’s that shoud be anytime now 
Stay lit my friends
4 Likes
Alright next update 3/30
Feed clone Alaskan ice still using what was left from last feed ( which is every other day right now) in at ph 6.4 ppm 930
Runoff ph 6.0 ppm 1480
happy with that
Hydro holding eerily steady
At ph 6.07 ppm 1070
3/31
Took 6 cuttings off the clone and put them in the cloner king we’ll see how that goes i added an aquarium heater to keep water at 70 ish im in a cold basement in Central ny so tempis still cold at night
Also watered only the clone
In at ph 6.52 ppm 140
Runoff ph 6.38 ppm 950
4/1
Water pluto cut
Ph 6.55 ppm 140
Till slight runoff
Trimmed hydro girls a little, fan leaves are HUGE so had to remove a few that covered bud site’s
Aannd some root porn:metal:
Keep em growing growmies
6 Likes